Bachelor of Engineering (Mechanical) (Honours)
Make things happen. Mechanical engineers design, build and maintain complex machines and mechanical systems from the very small to the very large scale. Learn the finer points of engineering and machine design, fluid mechanics, and production engineering which will enable you to make systems and machinery for diverse industries from transport to medical devices.
In this program you will:
- Study fundamentals of engineering, including applied maths, physics, statics, and systems design
- Complete specialist courses in mechanical design, materials, manufacturing, and fluids and heat transfer
- Understand social, economic and environmental dimensions of engineering, and the importance of sustainable development
- Develop advanced problem solving, communication and project management skills
- Specialise in areas such as electrical and electronic engineering, mechatronic engineering, town planning studies and supply chain management
Location
CRICOS code
Entry threshold
ATAR/RankDuration
Full-time or equivalent part-time Only a full-time option is available to international students on a Student visa. Online programs are not available to Student visa holders.Indicative fees
Indicative 2023 fees (A$)
CSP Annual fee / Estimated total feeQTAC code
Start
- Semester 1
- Semester 2
- Semester 1
- Semester 2
Limited Minors available at UniSC Moreton Bay.
- Start
-
- Semester 1
- Semester 2
- Semester 1
- Semester 2
- Delivery mode
-
- Blended Learning
- Total courses
- 32
- Total units
- 384
- Duration
- 4 years 4 years
- CRICOS code
- 090700D
- UniSC program code
- SC411
- Program coordinator
Introductory courses (8) 96 units
ENG101 Foundations of Engineering
ENG102 Engineering Statics
ENG103 Introduction to the Internet of Things
ENG104 Introduction to Engineering Design
MTH103 Introduction to Applied Mathematics
MTH104 Introductory Calculus
SCI107 Physics
SCI110 Science Research Methods
Developing courses (8) 96 units
MEC200 Thermofluids 1
MEC205 Dynamics 1
MEC221 Mechanics of Materials
MEC225 Engineering Materials
MEC226 Manufacturing Technology
MEC227 Mechanical Design 1
MTH201 Calculus II and Linear Algebra
MTH203 Numerical Analysis
Graduate courses (12) 144 units
ENG302 Engineering Project Management
ENG304 Engineering Research Methodology
ENG401 Engineering Project 1
ENG402 Engineering Project 2
MEC300 Mechanical Design 2
MEC301 Materials Technology
MEC302 Thermofluids 2
MEC303 Computational Mechanics
MEC335 Production Engineering
MEC336 Engineering System Design
MEC400 Thermofluids 3
MEC405 Advanced Dynamics and Control
Minor courses (4) 48 units
Students must select one minor (48 units) from the following:
- Electrical and Electronic Engineering (for Mechanical Engineers)**
- Mechatronic Engineering (for Mechanical Engineers)**
- Civil Engineering (for Mechanical and Mechatronic Engineers)
- Climate Change and Coastal Zone Studies
- Environmental Studies for Engineers^
- Management for Engineers^
- Town Planning Studies^
- Public Health for Engineers^
- Visualisation and Animation
- Wider Engineering Studies
^Not available at Moreton Bay campus
**Not available at Sunshine Coast campus
-
Honours
The Bachelor of Engineering (Civil) (Honours) may be awarded with Honours. The class of Honours to be awarded to a student is dependent upon:
- the percentage results achieved by study or transfer in twelve courses (144 units) as specified in the table below; and
- the student achieving at least 65% in ENG402 Engineering Project 2.
Courses MTH203 Numerical Analysis MEC301 Materials Technology ENG302 Engineering Project Management MEC303 Computational Mechanics MEC335 Production Engineering MEC336 Engineering System Design MEC300 Mechanical Design 2 ENG304 Engineering Research Methodology ENG401 Engineering Project 1 ENG402 Engineering Project 2 MEC405 Advanced Dynamics and Control MEC400 Thermofluids 3 A student must complete a minimum of 8 courses (96 units) in the table and the research project for an honours grade to be awarded.
The minimum levels of achievement normally required for each class of honours are shown in the following table:
Honours results classification Overall Percentage attained in Specified Courses* Honours Class I 80% - 100% Honours Class IIA 70% - 79% Honours Class IIB 60% - 69% *The percentage result shall be rounded up if ≥ 0.5 or rounded down if < 0.5.
Note: Program structures are subject to change. Not all UniSC courses are available on every UniSC campus.
This study sequence reflects the current program structure. Continuing students must follow their commencing structure, which can be found in the previous student handbooks.
Explore the likely peer cohort in the student profile data
No admissions data available
In UniSC admitted new student{{ studentProfile.model.allStudents > 1 || studentProfile.model.allStudents[0] === '<' ? 's' : '' }} at the {{ studentProfile.getLocationByCode() }} campus
| Applicant background | No. of students | % of all students |
|---|---|---|
Notes
<5 - the number of students is less than 5
N/A - Students not accepted in this category
N/P - Not published: the number is hidden to prevent calculation of numbers in cells with less than five students.
Adjusted ATARs are a calculation of a student's ATAR + eligible adjustment factors and are used to determine admission. The raw ATAR is the student's rank before any adjustments are applied.
Entry requirements
For entry into most USC undergraduate degree programs, you need to have completed a minimum level of education similar to successful completion of Australian Year 12 with good grades.
Further studies, for example, a semester or more at college or university, can also be considered for entry and may give you credit transfer towards a degree.
Some examples of upper secondary qualifications and a guide to the minimum grades that USC will consider are listed here. These are minimum requirements and do not guarantee entry. Some programs may require higher grades. Alternative qualifications may also be considered on a case by case basis.
If your qualification (grouped by country) is not listed, send the qualification transcripts with your application form to the International Office for assessment.
English language requirements
You will also need to meet the English language requirements for this program. If you do not meet the minimum requirements, you may be able to enrol in our English Language Programs to reach the required level for most of UniSC’s programs (exceptions apply to non-standard English requirement programs).
Minimum entry threshold
Applicants must meet the minimum ATAR/Rank.
| Location | ATAR/Rank |
|---|---|
| Sunshine Coast | 60.00 |
| Moreton Bay | 60.00 |
Post admission requirements
Students must complete 60 days of suitable field experience.
Additional entry information
Applicants from a non-English speaking background should refer to the English language requirements for further information.
Exemption for first year Mathematics
High achieving mathematics students can apply for exemptions to introductory mathematics and calculus subjects. However, exempted courses will need to be replaced with engineering relevant courses to fulfil the requirements of the degree. Apply through the School of Engineering.
- Prerequisites
English (Units 3 and 4, C)
- Recommended prior study
- Maths Methods and/or Specialist Maths; and Physics or Chemistry
In order to graduate you must:
- Successfully complete 384 units as outlined in the Program Structure
- Complete a minimum of 60 days of suitable work experience. Students must meet all costs associated with the acquisition of practical experience to satisfy this requirement
- The acceptability or otherwise of employment experience, and the period of that type of experience that may be credited towards the 60 days, will be determined by the Program Coordinator.
- In nearly all cases students find and obtain the required experience as part of paid vacation employment during the summer break.
- Students complete their work experience programs in an area of their choice, and in the majority of cases they do so within commuting distance of their residential addresses.
Program notes
- Completing this program within the specified (full-time) duration is based on studying 48 unit points per semester (normally 4 courses) and following the recommended study sequence
- The unit value of all courses is 12 units unless otherwise specified
- It is each students responsibility to enrol correctly according to your course requisites, program rules and requirements and be aware of the academic calendar dates
- Courses within this program are assessed using a variety of assessment methods including essays, seminar presentations, reports, in-class tests and examinations. Not all courses will necessarily include all methods
- As part of your UniSC program, you may apply to Study Overseas to undertake courses with an overseas higher education provider
- Refer to the Managing your progression page for help in understanding your program structure, reviewing your progress and planning remaining courses.
Prospective students must consider the Inherent Academic Requirements before applying to study this program.
Refer to Engineering programs - Inherent Academic Requirements
UniSC strongly supports the rights of all people to pursue studies. The University embraces diversity and endeavours to accommodate all students.
What are Inherent Academic Requirements (IARs)?
The IARs of a program are those fundamental skills, capabilities and knowledge that students must be able to demonstrate in order to achieve the essential learning outcomes of the program, while maintaining the academic integrity of that program.
Students with a disability or chronic health condition may be able to have reasonable adjustments made to enable them to meet these requirements.
UniSC is committed to making reasonable adjustments to teaching and learning, assessment, placement and other activities to enable students to participate in their program.
Reasonable adjustments must not fundamentally change the nature of the IAR.
Consideration is given to a student's cultural and religious background/beliefs, which may impact on participation in their program or course. For further information contact Student Support.
Why are Inherent Academic Requirements (IARs) important?
IARs ensure the academic integrity of a program is maintained and preserves the University's learning, assessment and accreditation processes. They must be met by all students.
How does this affect you?
To successfully complete a program at UniSC, you need to be able to meet all the Inherent Academic Requirements.
If you are applying for a program, you should read the IAR statement carefully to ensure you are able to meet them.
If you have a disability or chronic health condition, contact a UniSC Disability Advisor to talk about the adjustments that may be put in place so you can meet the requirements.
Career opportunities
- Agriculture
- Automotive
- Aviation
- Chemical processing
- Construction
- Defence
- Engineering consultancies
- Government agencies
- Manufacturing
- Mining industry
- Oil and gas
- Pharmaceutical companies
- Research organisations
- Transport
Memberships
Graduates may be eligible to become members of:
- Engineers Australia
Accreditation
This program is internationally recognised to allow you to work in Australia and overseas.
Headstart Program - Year 11 or 12
The Headstart program lets you study uni subjects while you’re still in high school. If you successfully complete two Headstart courses, you’ll get a selection rank that you could use to get into uni.
Early Offer Guarantee scheme - Year 12
The Early Offer Guarantee scheme enables Year 12 students to be offered a place at USC on the basis of their Principal's recommendation.
Previous qualifications or experience
If you:
- have completed Year 12 (no matter how long ago)
- have a TAFE/VET qualification
- have relevant work experience, or
- have studied at university before (even if you didn’t complete your studies)
You may be eligible for a selection rank, which can help you get into uni. For more detailed information selection ranks and how applications are assessed, visit Admissions explained.
Tertiary Preparation Pathway
If you don’t have qualifications or experience that will give you a selection rank, you can complete the Tertiary Preparation Pathway as a stepping stone into most degrees. You can also use TPP to complete subject prerequisites.
If you haven’t studied in a while, TPP is also a great way to brush up on essential study skills like critical reading, assignment writing and referencing.
It can also build your knowledge and confidence in the subject areas you’ll need for your degree, like science or maths. TPP courses are fee-free for eligible domestic students.
I identify as Aboriginal or Torres Strait Islander
You may be eligible for direct entry into a USC degree based on your potential to succeed, under USC’s Indigenous Direct Entry and Access Scheme (IDEAS). All you have to do is complete an online application through our website.
- CSP estimate
- A$7,252 - 2023 Fees
- Annual tuition fee (A$, 2023)
- A$30,000
- Estimated total tuition fee (A$, 2023)
- A$120,000
Commonwealth supported places
Commonwealth supported places are substantially subsidised by the Australian Government so that students only pay 'student contribution" amounts. The student contribution amount will vary depending on the course you are studying and how much funding the Government provides.
If you accept a Commonwealth supported place you are a Commonwealth supported student. As a Commonwealth supported student you must make a contribution towards the cost of your education (unless you are enrolled in Enabling or Tertiary Preparation Pathway courses) with the majority of the cost met by the Commonwealth Government.
Commonwealth supported places are only available to domestic students. As a domestic student you are entitled to a Commonwealth supported place in an eligible program if you:
- meet the citizenship and residency requirements
- complete an electronic Commonwealth Assistance Form (eCAF)
- meet the University's entry requirements for your chosen program.
International fee-paying places
Estimated total tuition fees are based on 2023 rates and the minimum number of courses required within the programs standard duration.
Annual tuition fees are based on 2023 rates and the equivalent full-time student load as per the recommended study sequence in the relevant program.
Actual fees payable are based on the actual enrolment load in a teaching period (excluding Study Abroad and Postgraduate Qualifying Pathway).
All prices quoted are in Australian Dollars (A$).
Domestic applicants apply for admission through the Queensland Tertiary Admissions Centre (QTAC). Some applicants may be eligible to apply direct to USC if they meet certain criteria.
Find out about how to apply and key application closing dates.
No matter what kind of future you’re looking for, you can find it at UniSC. Our programs offer the choice and flexibility you need to get started on any career goal.
Visit How to apply for simple steps to submit your international student application and start your UniSC experience today.
Need help with submitting your application?
UniSC has appointed representatives to assist you with submitting your application and provide information about the steps you need to complete to begin your studies. You can contact a UniSC Representative in your area.
Any questions? Contact us.
QTAC code
| Location | QTAC code |
|---|---|
| Sunshine Coast | 013741 |
| Moreton Bay | 014741 |
Student story
“I enjoyed the diverse range of subjects, as well as the different options for further study and the learning opportunities that were offered. I also appreciated how hands-on the learning approach was, with field trips and opportunities to learn from practical experiences.”